Just like in Excel the MAX and MIN are some helpful equations in TILE! One example I used MAX for recently was in the CISPR 16 Profile I put on the FTP site. To get the highest level from several data elements I used: max(max(max(c_C6h1V,c_C5h1V),max(c_C4h1V,c_C3h1V))),max(c_C2h1V,c_C1h1V) You can use MIN in the same manner to find the lowest level. [...]
You can use third party FTP applications to connect to our FTP site. We use Filezilla. you can get it at: http://filezilla-project.org/ After you install and run it. Use the following fields: HOST: Tilesupport.com Username: Your full username (ex: 0001234@tilesupport.com) Password: Your password.
In order to take advantage of the ‘measure at marker’ method in the Agilent e444x series EMI spectrum analyzers we had to create 2 new actions. They are the measure peaks and OATS for PSA. We still need to expand this to ‘Scan peaks’ action next. If you use the legacy actions, you will not [...]
Until today there was a feature in TILE! that we did not realize was there. It is in the Log Options GUI under the "Prompt" column. If you select all of the boxes beneath it, it will allow you to perform any action line-by-line so you can see what TILE! is doing. This will allow [...]
A member of our team wrote this as an internal memo. If he stole it from some great philosopher I apologize for the plagiarism. Since I am a hardware guy that supports software I think I can relate to this now. I thought I would share this with the TILE! users. If any of [...]
I just put a CISPR 16 profile on the FTP site. It is generic and is defaulting to the vertical polorization. I used some real data from an excel file to check it so the data elements should be replaced with measurement data. I left the data there to show what the results look like when [...]
We have released the latest version of TILE! It is a minor revision number but a major effort! For the most part you will not see a big difference but it is a huge step in the code maturity. Our goal was to get the code to a more supportable level with this revision. [...]
It appears there maybe some issues with the ortho-axis controller for GTEM’s. The issues may be associated with the mechanical installation of the controller. To level set TILE! users for the proper setup you can reference the 5407 GTEM manual (link below) to see if you are connected correctly. If you are still having trouble [...]
As we are ramping up this website to accomodate some typical users group information, I would like to solicit any TILE3 or TILE4 profiles that you may feel are usefull to others. Today I received a request for an RS103 antenna to antenna profile. If anyone has one they would like to share it [...]
For the most part you can figure out the driver by the alpha prefix, such as hp, ag, rs…and the numeric or alpha body; 8546, esu, esci, 2022. Yes there is some duplication of hp and ag drivers and some rs drivers simply have the unit name such as esi_rx. We have kept it [...]
